GO2106

Emulation wiring harness with the function of a power PWM generator with activation to ground, for controlling inductive electromechanical loads (solenoids, injectors, etc.). Protection on the positive supply (+12V direct from battery) by means of a 20A in-line fuse. Test function for direct, indirect, LPG and coil-type diesel injectors. With the dedicated program the following tests can be performed: leak test, automatic or manual flow test, flushing, descaling, spray angle evaluation.

Technical specifications:

F = variable activation frequency from 1Hz to 1000Hz d.f. = variable duty factor/cycle (1% – 99%).

V =12V; 30A

Typical applications:

This type of wiring harness can be used both on the vehicle and on the bench; its function is to generate a power PWM signal to activate electromechanical components and test their correct operation.