GO900

Using a specialised tool is an absolute must to ensure the correct installation of the SAC clutch. It is necessary for removing self-adjusting clutches (SAC) and is essential to prevent the clutch from losing its adjustment and causing operating problems when it is refitted.

Avoids applying opposing forces during assembly, thus preventing premature rotation of the adjustment ring and the pressure plate. The system makes it possible to exert different pressure by adjusting the forcing screw, depending on the diameter of the flywheel hub. Use the plate with 3 slots/arms for flywheel hubs with 6 threaded holes, and with 4 slots/arms for 8 threaded holes.

Supplied with a special set of tools for centring the clutch (14 pieces) for vehicles without a pilot bearing in the crankshaft. Problem: in these vehicles, the internal diameter of the crankshaft hole is larger than the hole of the clutch disc hub.